EIFS / ETICS Installation & Applicators/Plasterer in Dubai, UAE

1. Prepare Wall Surface: Clean and smooth the existing wall.

2. Apply Adhesive Glue: Use specialized adhesive glue on the wall.

3. Install EPS Board Insulation: Place EPS board onto the glued surface.

4. Secure with Mechanical Anchors: Install mechanical anchors for stability.

5.Application of 1st Layer of Base Coat: Apply the initial base coat for adhesion.

6. Integrate Reinforcing Mesh: Embed reinforcing mesh into the wet base coat.

7.Application of 2nd Layer of Base Coat: Apply a second base coat for added strength.

8. Apply Primer: Use primer to enhance final layer adhesion.

9. Final Paint Finish: Complete with a final paint finish for aesthetics and protection.

1. Prepare Wall Surface: Start by preparing the existing wall surface.

2. Apply Adhesive Glue: Use a specialized adhesive glue on the wall.

3. Install Stonewool Insulation: Place stonewool insulation onto the glued surface.

4. Secure with Mechanical Anchors: Ensure stability by installing mechanical anchors.

5. Application of 1st Layer of Base Coat: Apply a second layer of base coat for enhanced durability.

6. Integrate Reinforcing Mesh: Embed reinforcing mesh into the wet base coat.

7. Application of 2nd Layer of Base Coat: Apply a second layer of base coat for enhanced durability.

8. Apply Primer: Use a primer to prepare for the final layer.

9. Final Paint Finish: Complete with a final paint finish for both protection and aesthetics.

EIFS - ETICS